Picture of a Herschel Advantage IRP4 2600W Industrial Far IR Heater

Herschel Advantage IRP4 2600W Industrial Far IR Heater

Herschels logo Part no. IRP4
Product Code 2500823369

Product Overview


The Advantage IRP4 Industrial heater consists of 4 high-emission ceramic heating elements mounted in a directional reflective unit. It is designed to gently warm people indoors using infrared radiated heat. Infrared heat is emitted from the hot surface of the ceramic heaters and warms the body directly without heating the air in between. As soon as the heater is switched on the ceramic elements start to warm up and full operating temperature is achieved in less than 10 minutes. As the energy produced is all in the low medium to far infrared region (not visible), there is no light emitted from the heater, but elements can produce a very faint orange glow. The Herschel IR must be located in a position to allow for proper and efficient use but one that ensures hot parts are not touched accidentally. The unit is designed to be mounted or suspended from a ceiling. The recommended height for the mounting is 2.8m to 3.5m (137”-158”) from ground level and a minimum 125mm from the ceiling and 1.5m from the nearest wall. The heating elements are at a fixed downward angle to ensure maximum heat arc from this installation height. The Herschel IRP4 MUST NOT be installed at a height of less than 2.8m (137”). Consideration should be given to any temporary or occasional additions such as stages or platforms, and the height should be adjusted accordingly. The Herschel IRP4 should be firmly and permanently attached to the ceiling directly via its own brackets or via appropriate suspension cables.

Product Features

  • Element: 4 x White glazed ceramic longwave Infrared emitters (3-10 microns)|Body: Stainless Steel body with protective grill|Voltage: 230V
  • 50 Hz|Protection: IP rating IP20|Guarantee: 5 years|Heated Zone: 21m2| The heater will directly warm people and objects within the Heated Zone (note: air movement may reduce area coverage). Within enclosed areas the thermal mass of the building will also be heated. This will increase the ambient temperature and dependent upon the property age/type and insulation
  • may increase the effective heated area by up to 100%. For larger commercial projects or where different mounting heights are required we would always recommend Herschel carry out a survey or detailed desktop assessment.