HERSCHEL ADVANTAGE IR 3 consists of 3 high-emission ceramic heating elements mounted in a directional, reflective unit. It is designed to gently warm people indoors using infrared radiated heat. Infrared heat is emitted from the hot surface of the ceramic heaters and warms the body directly without heating the air in between. As soon as the heater is switched on the ceramic elements start to warm up and full operating temperature is achieved in less than 10 minutes. As the energy produced is all in the low medium to far infrared region (not visible), there is no light emitted from the heater, but elements can produce a very faint orange glow.The Herschel Advantage IR3 must be located in a position to allow for proper and efficient use but one that ensures hot parts are not touched accidentally. The recommended height for the mounting is 2.3m to 2.5m (90”-98”) from ground level, with the heaters angled down at 60 degrees. The Herschel Advantage IR3 MUST NOT be installed at a height of less than 2.3m (90”). Consideration should be given to any temporary or occasional additions such as stages or platforms, and the height should be adjusted accordingly. The Herschel Advantage IR3 should be firmly and permanently attached to the wall.
- Element: 3 x White-glazed ceramic longwave Infrared emitters (3-10 microns)|Body: Stainless Steel or coated body|Voltage: 230V
- 50 Hz|Protection: IPX4|Guarantee: 5 years|Heated Zone: 12m2|The heater will directly warm people and objects within the Heated Zone (note: air movement may reduce area coverage). Within enclosed areas the thermal mass of the building will also be heated. This will increase the ambient temperature and dependent upon the property age/type and insulation
- may increase the effective heated area by up to 100%. For larger commercial projects or where different mounting heights are required we would always recommend Herschel carry out a survey or detailed desktop assessment