Picture of a Watersavers Urinal Flush CTRL 6v dc

Watersavers Urinal Flush CTRL 6v dc

Watersaverss logo Part no. AUTOSAVE B02
Product Code 2500633249

Product Overview

Description

6v Battery Operated 15mm Urinal Flush Control with integral PIR Sensor and Remote Solenoid Valve for concealed cisterns eg those fitted behind panelwork and also for installations where the cistern is situated at a distance from the urinal bowl.The Autosave B02 flushing control saves water by flushing urinals only after use. A built-in infrared PIR sensor detects persons in the toilet area and initiates a cistern fill and flush cycle a preset time later. A pre-wired remote solenoid valve allows flexible siting. A simple pushbutton setup procedure sets the cistern fill time and a programmable switch enables the installer to choose the flushing frequency and also to set a hygiene flush interval for periods when the building is unoccupied

Product Features

  • Detection: By built-in passive infrared sensor; range approx. 4m; coverage 100 from perp
  • Solenoid valve: brass latching; 15 mm compression fittings; 2mm orifice; pressure range 0 - 12 Bar with mesh filter (optional low pressure valve for tank fed installations)
  • Alternative valve specifications: contact sales department
  • Batteries: 4x Duracell AA cells (supplied) - average life 3 - 4 years. No need to reset when changing batteries
  • Low Battery Warning: Led flashes to indicate low battery status. Valve closes (fail safe) 2 weeks following initial warning
  • Cistern fill time: 1 to 34 minutes - set by simple pushbutton routine
  • Flush Program options: flush delay (time from detection to actual flush) 5 - 35 mins in 5 min increments; hygiene flush 12 or 24 Hour
  • Test function: By Magi-test device; provides instant full functional test including valve; infrared PIR sensor operation; battery status; water supply and cistern fill time.